Call
Send my caller ID
(network service) — to set your phone number to be displayed
(
Yes
) or hidden (
No
) from the person whom you are calling. The value may be set
by your service provider when you subscribe to the service (
Set by network
).
Call waiting
(network service) — to set the network to notify you of a new
incoming call while you have a call in progress. To request the network to activate
call waiting, select
Activate
. To request the network to deactivate call waiting,
select
Cancel
. To check whether the function is active, select
Check status
.
Reject call with SMS
— to enable rejecting phone calls with a text message. See
"Answer or reject a call," p. 23.
Message text
— to enter a text to be sent when you reject a call with a text
message
Image in video call
— to select a still image to be shown instead of the video when
you deny video sending in a video call
Automatic redial
— to set the device to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt. Press the end key to stop
automatic redialing.
Summary after call
— to set the device to briefly display the approximate duration
of the last call
Show call duration
— to set the device to display the call duration during a call
Speed dialling
>
On
— to set the device to dial the numbers assigned to the speed
dialing keys, 2 to 9, by pressing and holding the corresponding number key
Anykey answer
>
On
— to answer an incoming call by briefly pressing any key,
except the left and right selection keys, volume keys, my own key, Navigator key
and the end key
Line in use
(network service) — shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (
Line 1
or
Line 2
) you
want to use for making calls and sending short messages.
Calls on both lines can be answered irrespective of the selected line. You cannot
make calls if you select
Line 2
and have not subscribed to this network service. To
78
prevent line selection, select
Line change
>
Disable
if supported by your SIM card.
To change this setting, you need the PIN2 code.